• <dd id="m2ukr"></dd>

    <progress id="m2ukr"><pre id="m2ukr"></pre></progress>

    <rp id="m2ukr"></rp>

    SUEZ Water - Water Technologies & Water

    Integra L

    Large centralised water system - clinical analyser feed

    Our Integra L units have been designed to provide a broad spectrum of purified water for laboratory applications. Each unit is designed to feed a laboratory suite with several outlets using a ring main to provide a continuous supply. The water is stored in an integral 250 litre stainless steel tank. Two units are available: The Integra LH for hard feed water and Integra LS for soft feed water.

    Features

    Integra L

    To provide higher grades of purified water the basic Integra L units can be supplemented by the addition of optional polishing packs comprising of stand-alone exchangeable cylinders. For applications requiring high quality water with enhanced bacterial specification, UV disinfection and 0.2μm filtration is available in an optional BIO pack.

    Additional features

    • Single compact unit which purifies, stores and distributes lab water
    • Produces up to 600 l/hr
    • Provides ASTM Type I, II or III water and BS EN ISO grade 1,2 or 3 water
    • Utilises reverse osmosis technology, in conjunction with activated carbon and particulate filtration as part of the first stage of purification
    • Integrated data logging for performance traceability equipped as standard
    • Delivered factory tested for ease of installation
    • LCD touch screen display for ease of operation.

    Unit Specifications

    Width (mm) 1000
    Depth (mm) 750
    Height (mm) 1800
    Max shipping weight (kg) 310
    Max working weight (kg) 550

    Installation Requirements

    Power Single Phase, 230V, +/- 10%, 50 Hz
    Feed water Potable*
    Maximum TDS (ppm) 1000
    Minimum inlet pressure – psi (bar) 15 (1)
    Maximum inlet pressure – psi (bar) 90 (6.2)
    Feed water temperature 1-35°C
    Flowrate
    Free chlorine Must be dechlorinated

    System Specifications

    Pure water storage 250 litres
    Display panel LCD – screen
    Pre-treatment 5μm pre-filter
    Reverse osmosis Low energy membranes
    Deionisation Optional Di packs*
    Micro filtration Optional 0.2μm**
    UV lamp Optional 254nm**
    Purified water make-up flowrate @ 10°C 200 – 600 l/hr***
    Purified water distribution Up to 3000 l/hr
    Carbon dioxide degassing
    TOC reduction Optional*

    * 10, 15, 18MΩ.cm polishing deionisation packs available including activated carbon for TOC reduction
    ** Included in BioPack
    *** Softened feed water required for 600 l/hr (Integra LS). Integra LH can operate on hard water up to 400ppm as CaCO3

    Treated Water Specifications

    Conductivity < 30μs/cm*
    Bacteria > 99% rejection**
    Organics – TOC (ppb) < 50***
    Particles 0.2μm**
    Endotoxins 0.25EU/ml**

    * For enhanced inorganic and organic quality the unit can be fitted with either 10,15 or 18MΩ.cm polishing deionisers packs.
    ** Optional ‘BioPack’ will provide purified water with a total viable count of <1cfu/ml, endotoxin level <0.25EU/ml and particles <0.2μm
    *** Typical level, depends on feedwater